Acceptance Test - AGFA DRYSTAR 5302 5366 Service Manual

DD+DIS150.05E
7
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Controls, Connections and Set Up Procedures

Acceptance Test

Purpose of the acceptance test:
Proof of printer reproduction capability of image on the monitor
Perform the acceptance test according to national regulations.
Example for Germany: DIN6868 Part 56
The German DIN6868 Part 56 is similar to the Image Quality Control
procedure based on IEC1223-2-4.
The Image Quality Control procedure based on IEC 1223-2-4 is described in
the Hardcopy Application Manual DD+DIS078.05E.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Figure 20
Agfa Company Confidential
Chapter 1 / 27