AGFA DRYSTAR 5302 5366 Service Manual page 431

DD+DIS148.05E
*NOTE:
•
It is possible to define more than one AE title at the printer – this means it's
possible to have two or more "logical" DRYSTAR 5302 printers.
•
To configure logical SCP printers can be necessary, in case for example printing is
initiated at a PACS system, which has several modalities as input.
Example:
The PACS system collects CR and CT images.
•
CR images shall be printed with taste LUT Kanamori
•
CT images shall be printed with linear taste LUT.
Problem:
The workstation at the PACS system has one AE title only. The DRYSTAR 5302 does
not recognize, for which type of modality (CR or CT) the user wants to print.
Solution:
•
Create one logical printer 'DRYSTAR5302_CR' and one 'DRYSTAR5302_CT'.
•
Create two different host profiles for the two logical printers, one with Kanamori
LUT, the other with linear taste LUT.
•
In the workstation setup both printers: The user has to select the proper logical
printer, depending on the application.
⇒ The number of logical SCP printers is not limited. As each configured SCP server
consumes resources of the printer, use as little SCP servers as possible. Rule of
thumb: Define max. 4 logical printers.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
12-2007
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
5366/100
Installation Planning
Chapter 11 / 13
Agfa Company Confidential
1 2 3