GE Vivid 3N Pro Series Service Manual page 88

Table of Contents

Switching the System OFF

After turning OFF the system, wait at least 10 seconds before turning it on again. The system may not

be able to boot-up if power is recycled too quickly.

The system can be switched OFF in one of three ways:

By holding down the On/Off button for 3 seconds, the unit will perform an automatic shutdown

sequence that protects the hard disk and switches into an energy-saving standby mode.

By holding down the On/Off button for more than 3 seconds, the unit will display a shutdown menu,

enabling the operator to shutdown the system to standby mode or to perform a full shutdown (see

Figure 3-18 "Shut-Down Options Screen" on page

By holding down the On/Off button for more than 10 seconds, the unit will perform an emergency

shutdown. It is not recommended to use this type of shutdown unless the application is locked and

no other operation can be performed.

Figure 3-18 Shut-Down Options Screen

Section 3-6 - Completing the Hardware Installation