GE Vivid 3N Pro Series Service Manual page 230

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
Table 6-14 Vivid 3N 17" Monitor Function Controls (Cont'd)
Function
Degauss
Recall
Video Input Level
Sync. Input Type (Option)
D-SUB/BNC (Option)
Display Timing
Menu Position
Menu Duration
Language
Highlight Zone
Highlight Position
Highlight Size
Highlight Contrast
Highlight Color
Highlight Zoom
Highlight Sharpness
6-18
04
EVISION
Description
The Degauss feature will remove color impurities caused by magnetic fields. Do
not use the Degauss feature more than once within a 30-minute period.
Note: The monitor may buzz momentarily, the image colors may change and the
image will jiggle for a few seconds. These effects are normal.
Use the recall feature to reset these monitor settings to their original levels:
Position, Size, Pincushion, Trapezoid, Parallelogram, Pinbalance, Rotation,
Clear Moire.
Note: If you have selected "Yes", all settings listed above will be reset. All other
settings will remain the same.
Some video cards use video signals higher than 1.0 V which causes the display
to be very bright. For those video cards, use this feature to select the 1.0 V Level.
Use this menu to set your monitor to the correct type of synchronization.
Select 'Separate' if the computer is sending a separate synchronization signal.
Select 'Sync. on Green' if the computer expects the monitor to synchronize with
the green signal it sends.
Refer to your computer or video card user's manual to determine the correct
setting.
Use this menu to choose between the signal source connected to the BNC
connector input and the signal source connected to the D-SUB connector input.
Note: When you are finished, wait for a few seconds and the screen will blank then
display the image from the new signal source (other computer).
A cable must be connected to both inputs to use this function.
You can see the frequency (user control mode) used by the user, the polarity of
the operational signals, the default frequency (default mode) set when you buy the
monitor and the resolution level.
Note: These screens do not allow any changes to the settings, they are for
information only.
You can change the position where the OSD menu appears on your monitor.
The menu will automatically turn Off if no adjustments are made for a certain time
period. You can set the amount of time the menu will wait before it turns Off.
Enables you to select the on-screen menu language options.
This function is to execute or cancel the Highlight Zone.
This function is to move the Highlight Zone horizontally or vertically.
This function is to adjust the size of the Highlight Zone.
This function is to use the Contrast of the Highlight Zone.
This function is to adjust the color of the Highlight Zone.
This function is to enlarge or reduce the Highlight Zone.
This function is to adjust the sharpness of the Highlight Zone.
Section 6-6 - Monitor Operation
V 3N P /E S
IVID RO XPERT ERVICE
M
ANUAL