GE Vivid 3N Pro Series Service Manual page 481

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-6-8-4 Front Wheel Removal - Procedure 2 (cont'd)
6) Remove the four bolts (three wrench bolts and one Allen bolt - see
one of the front wheels to the chassis, and remove the wheel.
7.) Proceed to
wheel in place of the one removed.
8.) Repeat
9.) Proceed to
new front wheel, then complete the remaining steps of the front wheel installation procedure.
04
EVISION
Figure 8-95 Removing the Transverse Arm
Figure 8-96 Front Wheel Bolted to Chassis
step 1 of the Front Wheel Installation - Procedure 2
step 6 above, to remove the other front wheel from the chassis.
step 2 of the Front Wheel Installation - Procedure 2
Chapter 8 Replacement Procedures
V 3N P /E S
IVID RO XPERT ERVICE
Transverse Arm
(Wheel Position Bar)
Figure 8-96 below) that secure
Securing Bolts
on page 8 - 112 to install a new front
on page 8 - 112, to install the second
M
ANUAL
8-111