GE Vivid 3N Pro Series Service Manual page 320

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
7-4-6-1 MOD Diagnostic Test (cont'd)
11) Trackball to the <GetVolInfo> button and press Select. The message Media in drive G has
following properties: Media Label = TEST_LABEL, Media File-System Name = FAT
is displayed.
12) Trackball to the Exit button and press Select.
7-4-6-2 CD Writer Diagnostic Test
1) Insert a new recordable CD X16 in the CDR drive.
2) Access the HW Diagnostics menu, as described in
Options" on page
3) Trackball to the Media Driver button and press Select. The Util_MO_CDR_App dialog box is
displayed, as shown in
4) Trackball to the CDR radio button and press Select.
5) Trackball to the IsMediaAccess button and press Select.
The message Media in drive H is accessible is displayed.
6) Trackball to the Eject button and press Select.
The message Finalize Media? is displayed.
7) Select No. The message Media is outside is displayed.
Verify that the media has actually been ejected.
8) Trackball to the Load button and press Select. The message Media is inside is displayed.
Verify that the media is actually inside.
9) Trackball to the Format button and press Select.
The message Media in drive H was formatted successfully is displayed.
10) Trackball to the GetVolInfo button and press Select.
The message: Media in drive H has following properties: Media Label = MY_LABEL, Media
File-System Name = CDUDF is displayed.
11) Trackball to the GetBtPSector button and press Select.
The message The Bytes Per Sector value of media in drive H is 2048 is displayed.
12) Trackball to the SetVolLabel1 button and press Select.
The message Media Label set to TEST_LABEL2 is displayed.
13) Trackball to the GetVolInfo button and press Select.
The message Media in drive H has following properties: Media Label = TEST_LABEL2,
Media File-System Name = CDUDF is displayed.
14) Trackball to the FlushVol button and press Select.
The message The cached data is flushed to the volume in drive H is displayed.
15) Trackball to the Exit button and press Select.
7-82
04
EVISION
7-71.
Figure 7-53 "Util_MO_CDR_App Dialog Box" on page
Section 7-4 - Performing Back End Diagnostics on the System
V 3N P /E
IVID RO XPERT
7-4-1 "Accessing the Back End Diagnostic
S M
ERVICE ANUAL
7-80.