GE Vivid 3N Pro Series Service Manual page 431

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-5-1-4 Back End Processor Installation Procedure (cont'd)
26.)Select the appropriate settings, as follows:
27) Perform a complete functional check of the system, as described in
Checks.
28) Install the Vivid 3N rear, left and right covers - refer to the
Procedure" on page 8-4
04
EVISION
Figure 8-56 System Configuration - Technical Support Tab
* Ex Keyboard -
* Sound Board -
* Number of Fans -
* UPS -
* VIC -
* Nominal Voltage -
and
Chapter 8 Replacement Procedures
Revision 4
Ver. 3
Set to 7 for BT00 systems; Set to 5 for BT01 systems
Change the UPS setting to Used or Not Used, as appropriate.
If the Plug & Scan option was purchased, the UPS setting can be
selected as Used. If this option not purchased, select Not Used.
Set to PC VIC
Set to the appropriate local voltage setting.
8-2-4-4 "Rear Cover Installation Procedure" on page
V 3N P /E S
IVID RO XPERT
Chapter 4 - - Functional
8-2-2-4 "Side Covers Installation
M
ERVICE ANUAL
8-7.
8-61