GE Vivid 3N Pro Series Service Manual page 79

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
3-6-2-2 Connecting the VCR
1) Place the VCR on the peripheral tray and connect the following:
Table 3-16 VCR Cables
S-Video IN
S-Video OUT
Audio IN
Audio OUT
BE Control (RS-232)
2) Install the VCR according to the VCR installation schematics, see
Securing Printer" on page
3) After connecting the remaining peripherals and switching the system on, configure the VCR
settings, as described in
3-6-2-3 Connecting the Black & White Printer
1) Place the printer on the peripheral tray and connect the following cables as shown in
Table 3-17 Black & White Printer Cables
Video IN
External Trigger
Power Cable
2) Install the printer according to the printer's installation schematics, see
Securing Printer" on page
3) After connecting the remaining peripherals and switching the system on, configure the printer
settings, as described in
04
EVISION
From the VCR
8-139.
3-8-9 "VCR/ECG Tab" on page
From the Printer
8-139.
3-8-8 "Printers Tab" on page
Chapter 3 Installation
To the Left Panel
S-Video OUT (Y/C OUT)
S-Video IN (Y/C OUT)
Audio OUT
Audio IN
VCR RS 232 (1)
To the Left Panel
Composite Video OUT B/W
Print Trigger
Right Connectors Panel AC outlet
V 3N P /E
IVID RO XPERT
DIP on VCR Right Panel
1-4 OFF (down)
5-6 ON (up)
Figure 8-123 "Belt Buckles
3-44.
Figure 8-123 "Belt Buckles
3-42.
S M
ERVICE ANUAL
Table 3-17.
3-25