GE Vivid 3N Pro Series Service Manual page 501

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-8-3-6 JVC VCR Installation Procedure (cont'd)
JVC VCR
9.) Bundle all the VCR cables together into a single loom and bind together with cable ties.
10.)With the control console still at the maximum height, route the cable loom down to the left rear
connectors panel (at the rear of the Vivid 3 unit).
11.)Fasten the loom to the Vivid 3N bottom cover using the square adhesive cable fastener (supplied).
12.)Connect the RS-232C cable, the Audio and S-Video IN and OUT cables, and the Power cable to
the appropriate sockets on the Vivid 3N rear connectors panel - see
Rear Panel Connectors" on page
04
EVISION
Fix Adhesive Velcro Strip Here
Figure 8-114 JVC VCR Installed in Compartment
Chapter 8 Replacement Procedures
8-132.
V 3N P /E S
IVID RO XPERT ERVICE
Figure 8-115 "Vivid 3N Left
M
ANUAL
8-131