GE Vivid 3N Pro Series Service Manual page 277

Table of Contents

Receive Test (cont'd)

The Report dialog box contains the following information:

Test Result Message: Displays the test result.

TR4 Modules: Displays a graphic representation of the front board (four groups of TR4 sockets).

Each group consists of four TR4 sockets, each socket containing four vectors (channels), as

Checkboxes: Enable you to manipulate bad channels:

Figure 7-21 Report Dialog Box - Receive Test Low Frequency

Each vector is represented by a button (highlighted in green) that displays the number of the

socket to which the TR4 is connected.

Each button is highlighted yellow when selected.

Each button is highlighted red if errors were detected for one or more channels.

Show Only Bad Channels: Select this checkbox to display only bad channels in the Display

Mark bad channel: Select this checkbox to manually mark the currently selected channel as

Chapter 7 Diagnostics/Troubleshooting