GE Vivid 3N Pro Series Service Manual page 323

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
7-4-7-2 Check Disk/Bus
1) Access the HW Diagnostics menu, as described in
Options" on page
2) Trackball to the Computer Testing button and press Select. The options shown in
"Benchmark Testing Options" on page 7-83
3) Trackball to the Check Disc/Bus button and press Select. The Disk/Bus Bench window is
displayed as shown in
Disk Bench: In the information displayed, make sure that the speed values displayed are greater than
23MB/sec. This test checks the speed of information transfer between the hard disk and IDE BUS.
Bus Bench: In the information displayed, make sure that the speed values displayed are greater than
86MB/sec. This test checks the speed of information transfer between the memory and the BUS.
04
EVISION
7-71.
Figure 7-56 "Disk/Bus Bench Window" on page
Figure 7-56 Disk/Bus Bench Window
Chapter 7 Diagnostics/Troubleshooting
V 3N P
IVID
7-4-1 "Accessing the Back End Diagnostic
are displayed.
/E S M
RO XPERT ERVICE ANUAL
Figure 7-54
7-85.
7-85