GE Vivid 3N Pro Series Service Manual page 507

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-8-4-4 Color Video Printer Installation - Procedure1 (cont'd)
14) Lock the belt buckles to tighten the shelf to the top surface. Verify that the B/W printer and VCR are
secure.
15.)Re-connect the previously-disconnected B/W Printer and VCR cables.
16) Place the Color Video Printer on top of the shelf, allowing sufficient room to access the cables at
the rear of the printer, as shown in
Figure 8-120 Color Video Printer and Shelf Installed on the Vivid 3N
17.)Connect the Ground cable (hanging out of the Bottom Metal Cover) to the Ground screw at the rear
of the Color Video Printer, as shown in
Ground Cable
04
EVISION
Figure 8-121 Color Video Printer Ground Cable Connection
Chapter 8 Replacement Procedures
V
Figure 8-120 below.
Figure 8-121 below
Ground Screw
3N P /E S
IVID RO XPERT ERVICE
Color Video Printer
M
ANUAL
8-137