Table of Contents
Advertisement
GE M
S
EDICAL
YSTEMS
D
FK091075, R
IRECTION
8-8-2-4
Sony VCR Installation Procedure (cont'd)
2.) Connect the RS-232C cable, the Audio and S-Video IN and OUT cables, and the Power cord, as
shown in
.
3.) Place the VCR in its correct final position.
4.) Secure the VCR by fastening the belt around it, or together with the B/W Printer (if present).
5.) Re-install the Connectors Panels Cover as described in
Installation Procedure" on page
6) Reconnect the mains AC power cable from the wall outlet.
7) Turn ON the main circuit breaker located on rear of the Vivid 3N.
8) Turn ON the Vivid 3N by pressing the ON/OFF button on the Control Console.
9.) Under System Configuration, VCR/ECG Tab, select the appropriate VCR mode options. For more
information, see
8-124
04
EVISION
Figure
8-108.
S-VIDEO OUT cable
From: Left Connectors Panel,
S-Video OUT
To: VCR S-Video IN
To: S-Video Output
AUDIO OUT cable
From: Left Connectors Panel:
IN-R Connector (Red)
IN-L Connector (Black)
To: VCR Audio Output:
BLACK: CH1
RED: CH2
AUDIO
IN
CH1
CH2
Figure 8-108 Sony VCR Connection Cables
3-8-9 "VCR/ECG Tab" on page
Section 8-8 - Peripherals
AUDIO IN cable
From: Left Connectors Panel:
Out-R Connector (Red)
Out-L Connector (Black)
To: VCR Audio Input:
AUDIO
OUT
VIDEO IN
CH1
S
S
VIDEO
VIDEO
CH2
AC IN
Power cord
From: Left Connectors
Panel AC OUT
To: VCR AC IN
8-8.
3-44.
V
3N P
/E
IVID
RO
XPERT
BLACK: CH1
RED: CH2
S-VIDEO IN cable
From: Left Connectors
Panel,
S-Video OUT
To: VCR S-Video IN
RS-232 cable
From: Left Connectors Panel,
Connector RS-232(1)
To: VCR RS-232C Input
Dip Switches Panel
Up = ON
Down = OFF
8-2-5-4 "Connector Panels Cover
S
M
ERVICE
ANUAL
Advertisement
Table of Contents
