Ricoh MP C6502SP Field Service Manual page 136

2. Installation
Installation Procedure
1. Connect the network cable if it needs to be connected.
2. Turn on the main power switch.
3. Go into the SP mode and push "EXECUTE" in SP5-878-001.
4. Exit the SP mode and turn off the operation switch. Then turn off the main power switch.
5. Turn on the machine power.
6. Do SP5-990-005 (SP print mode Diagnostic Report).
7. Go into the User Tools mode, and select [System Settings]
Erase Memory Setting]
8. Exit the User Tools mode.
9. Check the display and make sure that the overwrite erase icon appears.
10. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during
overwriting.
134
[On].
This icon is lit when there is temporary data to be overwritten,
Icon [1]
and blinks during overwriting.
This icon is lit when there is no temporary data to be
Icon [2]
overwritten.
[Administrator Tools] [Auto