Moving The Machine; D137/D138 - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

Encryption key sample

The encryption key is printed out as a sheet of paper like the example shown above.

Please instruct the customer to keep it in a safe place.

Moving the Machine

1. Turn off the main power switch, and then unplug the power cable from the main machine.

2. Close all the doors and trays that are openable and closable, and then secure them in place with

shipping tape.

3. Make sure to follow all the precautions listed below when moving the machine. This is to prevent

the machine from being damaged and the drawer unit from coming out.

• Do not put a load on the ADF

• When moving the machine, push the machine instead of pulling the machine. Pulling the

machine may cause damage to the covers.

• When pushing the machine, push the upper side of the machine in the areas marked with red

rectangles below. If you move the machine over an uneven surface, insert your hands under

Moving the SR4090/SR4100 finishers

Main Machine Installation

Table of Contents