Mounting An Nfx350 Device; Mounting An Nfx350 Device On Four Posts In A Rack Or Cabinet - Juniper NFX350 Hardware Manual

CAUTION:
update the installation base data if there is any addition or change to the installation
base or if the installation base is moved. Juniper Networks will not be held accountable
for not meeting the hardware replacement service-level agreement for products that
do not have registered serial numbers or accurate installation base data.
Register your product(s) at https://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installation base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp.

Mounting an NFX350 Device

Table 33 on page 67 lists the methods you can use to mount an NFX350 device.
Table 33: NFX350 Device Mounting Methods
Mounting Method
Four-post rack or cabinet
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that the device can be
mounted in any rack or cabinet that provides holes spaced at that distance.
SEE ALSO
Initial Configuration on NFX350 Devices

Mounting an NFX350 Device on Four Posts in a Rack or Cabinet

You can mount an NFX350 device on four posts of a 19-in. rack or cabinet by using the four-post rack-mount
kit. (The remainder of this topic uses rack to mean rack or cabinet.).
You can mount the device a four-post rack by using the mounting brackets provided with the device.
Register product serial numbers on the Juniper Networks website and
Device Model
NFX350-S1
NFX350-S2
NFX350-S3
Comments
On four posts in a rack or cabinet by using
the mounting brackets.
67