Incomplete Image Transfer To Paper - Xerox WorkCentre C2424DX Service Manual

Incomplete Image Transfer to Paper

Step Questions and Actions
Verify the media is supported for this system
1 1.
and/or try a higher quality or heavier media
type.
Did this correct the problem?
2.
Try using a higher quality print mode.
2 1.
Did this correct the problem?
2.
Poor drum oiling can cause the image
3 1.
transfer to be incomplete on one side of the
page.
Use service diagnostics to verify the drum
4 1.
maintenance cam roller and pivot plate are
operating correctly. Replace any defective
parts.
Did this correct the problem?
2.
Inspect and clean the maintenance kit wiper
5 1.
blade.
If necessary, replace the maintenance kit.
2.
Did this correct the problem?
3.
Inspect the drum temperature sensor and
6 1.
check for contamination and improper
positioning between the sensor and the
drum surface.
Clean and position the sensor as necessary
2.
Did this correct the problem?
3.
Image-Quality Troubleshooting
All of the image does not transfer to the paper.
Media that is not smooth enough or too light can cause
this problem. This problem can also occur on
watermarked paper.
s2424-086
Yes
Complete. Go to Step 2.
Complete. Go to Step 3.
Complete. Go to Step 5.
Complete. Go to Step 6.
Complete. Go to Step 7.
No
5-29