Version Upgrade Information - Omron V780 Series User Manual

Version Upgrade Information

This section describes the version upgrade details of firmware.
Ver 1.00 → Ver 2.00
Added "Auto" and "Focus" for the RF communications mode.
Expanded the access range of the user area in the RF tag with the communications command.
0000 to 07FF hex (2,048 words) → 0000 to 0FFF hex (4,096 words)
Added "RESET FOCUS" for the Reader/Writer control function.
Added "Installation Location Notification" for the Reader/Writer control function.
Added "RF Tag Selection Filter" for the RF communications conditions settings (advanced).
Added "RSSI Filter" for the RF communications conditions settings (advanced).
Added "Transmission Time" for the RF communications conditions settings (advanced).
Added "Operation Indicator Custom Settings" for the device settings.
Added "Communications Diagnostics" for the maintenance function (communications information).
Added "Transmission Power Tuning" for the tuning function.
Added "RF Tag Access" for the utility function.
Added "RF Tag Scanning" for the utility function.
Added "Reception Level Monitor" for the utility function.
Added "Channel Monitor" for the utility function.
Added "Focus Monitor" for the utility function.
Ver 2.00 → Ver 3.00
Added the Multi-Reader/Writer function.
Changed the channel to a channel number in accordance with the regulations of the Japanese
Radio Act, in the RF communications settings (advanced).
Changed the display during the noise level peak in "Channel Monitor" of the utility function.
Ver 3.00 → Ver 3.01
The communications time at multi access of "A-2 RF Tag Communications Times (For reference only)"
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Change content
Change content
Change content
Version Upgrade Information
P. 6-6
P. 6-13
P. 6-19
P. 6-20
P. 6-29
P. 6-28
P. 6-27
P. 6-30
P. 6-37
P. 6-42
P. 6-45
P. 6-46
P. 6-47
P. 6-53
P. 6-54
P. 6-6
P. 6-13
P. 6-19
P. A-4
Page
Page
Page
19