Omron V780 Series User Manual page 309

RF Tag Scanning
Click the Utility Button, and then click the RF Tag scan Tab.
A tab page to scan for RF Tags will be displayed. You can use this tab page to check for RF Tags in
the communications field of the Reader/Writer.
Results of RF Tag scanning are displayed for up to 64 RF Tags.
Precautions for Correct Use
This tab page cannot be used if the Reader/Writer is started in Safe Mode or SLAVE Mode. Use
this tab page when the Reader/Writer is operating in Run Mode.
Item name
No
UII (EPC)
No. of comms
Reception level
For information on RF Tag scanning, refer to 6-9-2 RF Tag Scanning on page 6-46.
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Click this button to start scanning for RF Tags
in the communications field of the Reader/Writer.
Click it during a scan to stop the scan.
Description
Displays the index numbers of the RF Tags.
Displays the UIIs (EPC codes) of the RF Tags that were
detected in the scan.
Displays the numbers of communications with the RF Tags
during the scan.
Displays the most recent reception levels measured during
the scan numerically and as a bar graph.
8 Browser Interface
Remarks
8 - 19
8