Rf Communications Settings - Omron V780 Series User Manual

8-2-4

RF Communications Settings

Basic Settings
Click the RF communication settings Button and then click the Basic settings Tab.
A tab page to set the basic parameters for communications with RF Tags will be displayed. You can edit
the settings.
Item name
RF communication
mode
RF communication
speed
RF communication
timeout
Write verify
RF communication
diagnostics
For information on the basic settings, refer to 6-4-2 RF Communications Conditions: Basic Settings on
page 6-22.
Precautions for Correct Use
• Click the Set Button. The settings will be applied immediately.
• If you change the settings while the Reader/Writer is performing RF Tag communications,
noise measurement, or other processing, an error message will be displayed. Change the
settings when the Reader/Writer is in idle state.
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Click this button to set the
displayed values.
Description
Select the communications mode.
Setting range: Once, Auto, or Focus
Select the speed of communications with the RF Tags.
Setting range: Auto speed, High speed, or Normal speed
Enter the timeout time for RF communications in milliseconds.
Setting range: 1 to 60,000 ms
Select whether or not to use write verification.
Setting range: Enable or Disable
Select whether or not to use RF communications diagnostics.
Setting range: Enable or Disable
8 Browser Interface
Default
Once
Auto speed
250 ms
Enable
Disable
8 - 9
8