7 Modbus/TCP Communications
GET MULTIACCESS ID READ RESULTS
Function
This command reads data from the RF Tag in the communications range.
You can specify reading up to 2,048 words with one GET MULTIACCESS ID READ RESULTS com-
mand.
Command Format
Byte-0
Byte-1
Transaction identi-
fier
X
X
Parameter
Register address
Word count
Response Formats
• Normal Response
Byte-0
Byte-1
Transaction identi-
fier
X
X
Byte-11
Byte-12
Error code
2 bytes
Parameter
Field length
Byte count
Number of RF Tags
7 - 36
Byte-2
Byte-3
Byte-4
Protocol identifier
Field length
0000 hex
0006 hex
The register address (9100 hex) that specifies getting the results of multiaccess ID
reading
0022 hex + Option size
• For details on option sizes, refer to 7-3 RF Communications Command Options
on page 7-10.
Byte-2
Byte-3
Byte-4
Protocol identifier
Field length
0000 hex
2 bytes
Byte-13
Byte-14
Byte-15
StoredPC
EPC code
2 bytes
Gives the total number of bytes starting from the unit identifier in 4-digit
hexadecimal.
0047 hex + Option size
• For details on option sizes, refer to 7-3 RF Communications Command
Options on page 7-10.
Gives the total number of bytes starting from the number of RF Tags in
2-digit hexadecimal.
44 hex + Option size
• For details on option sizes, refer to 7-3 RF Communications Command
Options on page 7-10.
Gives the number of RF Tags that were read in 4-digit decimal. (0001 to
001F hex)
The number of RF Tags is decremented when a command response is
returned.
Byte-5
Byte-6
Byte-7
Unit
Function
identifier
code
FF hex
03 hex
Description
Byte-5
Byte-6
Byte-7
Unit
Function
identifier
code
FF hex
03 hex
...
Byte-76
Byte-77
Reception level
62 bytes
2 bytes
Description
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Byte-8
Byte-9
Byte-10
Register address
Word count
9100F hex
2 bytes
Byte-8
Byte-9
Byte-10
Byte
Number of RF
count
Tags
1 byte
2 bytes
Byte-78
Byte-79
Byte-80
Options
Reader/Writer
Number
2 bytes
Byte-11