7 Modbus/TCP Communications
7-6-2
Multiaccess Communications Commands
SET MULTIACCESS ID READ
Function
This command specifies reading the IDs (i.e., the UIIs (EPC codes)) of the RF Tags in the communi-
cations range.
Command Format
Byte-0
Byte-1
Transaction identi-
fier
X
X
Byte-12
Byte-13
Byte
Options
count
02 hex
2 bytes
Parameter
Register address
Word count
Byte count
Options
Response Formats
• Normal Response
Byte-0
Byte-1
Transaction identi-
fier
X
X
Parameter
Word count
• Error Response
Byte-0
Byte-1
Transaction identi-
fier
X
X
Parameter
Exception code
7 - 34
Byte-2
Byte-3
Byte-4
Byte-5
Protocol identifier
Field length
0000 hex
0009 hex
Byte-14
The register address (9000 hex) that specifies setting multiaccess ID reading
The number of words for the option (0001 hex)
The number of option bytes (02 hex)
For details, refer to 7-3 RF Communications Command Options on page 7-10.
Options are implemented in a normal response to the GET MULTIACCESS ID
READ RESULTS on page 7-36.
Byte-2
Byte-3
Byte-4
Byte-5
Protocol identifier
Field length
0000 hex
0004 hex
Always 0001 hex.
Byte-2
Byte-3
Byte-4
Protocol identifier
Field length
0000 hex
0003 hex
For details, refer to Exception Code on page 7-7 under Response Format for Error
Completion on page 7-7.
Byte-6
Byte-7
Unit
Function
identifier
code
FF hex
10 hex
Description
Byte-6
Byte-7
Unit
Function
identifier
code
FF hex
10 hex
Description
Byte-5
Byte-6
Byte-7
Unit
Function
identifier
code
FF hex
90 hex
Description
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Byte-8
Byte-9
Byte-10
Byte-11
Register address
Word count
9000F hex
0001 hex
Byte-8
Byte-9
Word count
0001 hex
Byte-8
Excep-
tion code
1 byte