6 Functions
6-9-2
RF Tag Scanning
Outline
Use RF Tag access to see if there is an RF Tag in the communications range of the Reader/Writer.
You can check communications with RF Tags with just one button.
Scanning Method
Click the Start Button on the RF Tag scan View to display information on detected RF Tags. The RF
Tag scan list will display information on up to 64 RF Tags in the order that they are detected.
6 - 46
You can specify any of the following as the
test command: ID READ, ID WRITE, DATA
READ, or DATA WRITE.
The communications result (diagnostic result)
are displayed in red, yellow, or green.
The time required to communicate
with the RF Tag is also displayed.
Information on the RF Tags detected
by scanning will be displayed for up to
64 RF Tags.
UHF RFID System V780-series Reader/Writer User's Manual (Z389)