Network Settings - Omron V780 Series User Manual

8 Browser Interface
8-2-3

Network Settings

TCP/IP Settings
Click the Network settings Button and then click the TCP/IP Tab.
A tab page to set the IP address and other network settings will be displayed. You can edit the settings.
Item name
IP address setting method
Fixed setting
Obtain from BOOTP server
Fix at the IP address which is
obtained from BOOTP server
Device name
Precautions for Correct Use
If you change the IP address setting method from Fixed setting to Obtain from BOOTP server or Fix
at the IP address which is obtained from BOOTP server, the IP address, subnet mask, and default
gateway that are set for Fixed setting become 0. If necessary, perform a backup in advance.
8 - 6
Click this button to use the operation indica-
tors to confirm the installation location of the
Reader/Writer you are manipulating.
Click this button to set the
displayed values.
Select one of the following: Fixed setting, Obtain from
BOOTP server, or Fix at the IP address which is
obtained from BOOTP server.
Operation is performed with the fixed IP address that is
set.
IP address Enter the fixed IP address.
Subnet mask Enter the subnet mask (IPV4) that is used to identify the
network address and host address within the IP address.
Gateway Enter the IP address of the gateway to use to reach net-
address works outside the one that the Reader/Writer is on.
The IP address will be obtained from the BOOTP server
every time the power supply to the Reader/Writer is
turned ON.
The IP address will be obtained from the BOOTP server
only one time when the Reader/Writer is restarted after
this setting is made. After that, operation will be per-
formed with the fixed IP address.
Enter a name to use to identify the Reader/Writer on the
network.
Setting range: 63 ASCII characters max.
Description
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Default
Fixed setting
---
192.168.1.200
255.255.255.0
192.168.1.254
---
---
None