Maintenance: Log Information; Getting And Clearing The System Error Log - Omron V780 Series User Manual

6 Functions
6-6

Maintenance: Log Information

6-6-1

Getting and Clearing the System Error Log

You can access the system error log that is maintained in the Reader/Writer.
You can read the system error log by sending a command from the host device or by using the Web
browser interface.
• The system error log contains up to 15 fatal errors that were detected by the Reader/Writer during
operation. They are given in chronological order.
• If more than 16 errors occur, the oldest errors are deleted in order.
• The system error log is retained in memory inside the Reader/Writer even after the power supply is
turned OFF.
• You can also clear the log.
• The following record information is stored in the system error log.
Item
Time
Error code
Attached information 1
Attached information 2
6 - 34
Description
This is the time when the system error was
detected by the Reader/Writer.
This code is used to identify the error.
These codes provide additional information on the
error.
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Remarks
Errors classified as minor faults
and major faults are recorded.
For details, refer to 9-3 Errors
and Countermeasures on page
9-8.