Omron V780 Series User Manual page 344

9 Troubleshooting
Error name Command execution failure, busy
The Reader/Writer was executing another command and could not execute the received com-
Description
mand.
Detection timing At command execution
Log category Command error log
Additional infor- None
mation 1
(1) An RF communications command was received during a setting change.
Probable cause
(2) A setting command was received during execution of an RF communications command.
Workaround Check the operation status of the Reader/Writer and send the command again.
Precautions/ None
Remarks
Command execution failure (inappro-
Error name
priate operation mode)
Description The received command cannot be executed in the current operation mode of the Reader/Writer.
Detection timing At command execution
Log category Command error log
Additional infor- None
mation 1
Probable cause An RF communications command was received during operation in Safe Mode.
Workaround Check the operation mode of the Reader/Writer and send the command again.
Precautions/ None
Remarks
Command execution failure (inappro-
Error name
priate RF communications mode)
The received command cannot be executed in the current RF communications mode of the
Description
Reader/Writer.
Detection timing At command execution
Log category Command error log
Additional infor- None
mation 1
Probable cause A multiaccess RF communications command was received in Focus Mode.
Workaround Check the RF communications mode of the Reader/Writer and send the command again.
Precautions/ None
Remarks
Command execution failure, minor
Error name
fault
There was a system error (minor fault) in the Reader/Writer and the Reader/Writer could not exe-
Description
cute the received command.
Detection timing At command execution
Log category Command error log
Additional infor- Error code*
mation 1
Probable cause Refer to the error information for a minor fault in additional information 1.
Workaround
Precautions/ None
Remarks
*1. This provides information on the current minor fault.
9 - 10
Error code 1011 hex
Recovery method None
Additional infor- None
mation 2
1012 hex
Error code
Recovery method None
Additional infor- None
mation 2
1013 hex
Error code
Recovery method None
Additional infor- None
mation 2
1018 hex
Error code
Recovery method Restart the Reader/Writer.
Additional infor- None
mation 2
UHF RFID System V780-series Reader/Writer User's Manual (Z389)