Connections And Wiring; Connecting And Removing The Reader/Writer Power Cable And Ethernet Cable - Omron V780 Series User Manual

4 Installation and Connections
4-2

Connections and Wiring

4-2-1 Connecting and Removing the Reader/Writer Power Cable and
Ethernet Cable
Power Supply
Connect a power supply that meets the following conditions to the Reader/Writer.
Item
Supply voltage
Output current
Safety standard
Connecting Method
1
Hold onto the connector on the Power
Cable and insert it into the power connec-
tor on the Reader/Writer.
Precautions for Correct Use
Do not apply more than 30 N of force to the connector on the Reader/Writer.
2
Turn the connector on the Power Cable clockwise
to lock it in place.
• For the Recommended Cable
Turn the cable connector clockwise until you
hear it securely lock in place.
• For Other Cables
Observe the tightening torque specifications for
the cable connectors.
Pin No.
1
2
3
4
4 - 6
Condition
24 VDC −15% to +10%
500 mA min.
SELV (Safety Extra Low Voltage)
Name Description
24P +24 V
Control signal (operating
mode signal)
*1. Run Mode: Connect
to +24 V and then
CONT
start the
Reader/Writer.
Safe Mode: Connect
to 0 V and then start
the Reader/Writer.
24N 0 V
--- ---
Connector on Power Supply Cable
I/O
---
IN
---
---
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Reader/Writer Power Connector