Omron V780 Series User Manual page 116

6 Functions
Item
Communications speed
Reception level
Noise level
Target level
StoredPC
UII (EPC code)
*1. Values outside of the above range may be detected under some conditions.
Client
(host device)
6 - 40
Description
Indicates the communications speed when communi-
cating with an RF Tag.
Indicates the reception level measured during commu-
nications diagnostics.
*1
-35 to -61 dBm
Indicates the noise level measured during communi-
cations diagnostics.
*1
-35 to -70 dBm
Indicates the target level measured during communi-
cations diagnostics.
0 to 100
Indicates the UII (EPC code) (including the StoredPC
data) of the RF Tag that was communicated with
during communications diagnostics.
Communications command sent.
Response returned.
GET COMMUNICATIONS DIAGNOSTIC INFORMATION
command
Communications diagnostics results returned.
(Reader/Writer)
Unstable
communications
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Remarks
Indicates the speed selected
by the Reader/Writer when
the communications speed
setting is "Automatic."
This value is input only in
Focus Mode.
Server