Reading Error Information (Err) - Omron V600-CA8A-V Series Operation Manual

Reading Error Information (ERR)

4-6

Reading Error Information (ERR)

Error Logging Menu Selection
1, 2, 3...
56
5. Press Key 4 to select auto write, and then TAW is shown on the display.
Head 1 indicator lights now.
6. When the DC enters the operation range, the specified data is sent to the
memory area defined by the start and end addresses, and Head 1 indicator
flashes while processing occurs.
Note When only TAW is shown on the display, and no data is displayed, this
indicates the DC waiting condition. When an error code is displayed,
use the horizontal cursor keys to display the error message.
All communications, system, and other errors occurring in the RUN Mode are
stored in the ID Controller RAM. The latest error statistics (30 items maximum)
can be read or cleared using the Monitor Unit.
MONITOR
a00d00
RESET
ERROR1 4
ERR
(Error mode selection menu)
1
2
3
4
1. The ERR Key is not effective when MONITOR is shown on the display, so
press the RESET Key to display the address and data.
MONITOR Mode switch
(1)
(2)
Section 4-6