Omron V780 Series User Manual page 330

8 Browser Interface
Section name
RFCommunication-
Setting
RFCommunication-
AdvanceSetting
8 - 40
Entry name
WriteVerify Gives the setting for write verification for
write communications.
Either "true" or "false" is specified.
true: Verification used.
false: Verification not used.
RFCommunication Gives the enable/disable setting for RF com-
munications diagnostics. It is set to true or
Diagnostics
false.
true: Enable
false: Disable
ReadTransmission Gives the transmission power setting for read
RF communications commands. It is speci-
Power
fied as a decimal value.
15 to 27: 15 to 27 dBm
WriteTransmission Gives the transmission power setting for
write RF communications commands. It is
Power
specified as a decimal value.
15 to 27: 15 to 27 dBm
Channel Gives the channel setting. It is specified as a
decimal value.
*1. You can specify the value depending on
Gen2Session Gives the setting of the Gen2 session. It is
specified as a decimal value.
0 to 3: S0 to S3
AccessPassword Gives the access password for RF Tag com-
munications. It is specified in eight hexadeci-
mal digits.
A setting of 00000000 is treated as no pass-
word setting.
ContinuousTime Gives the setting of the continuous transmis-
sion time. It is specified as a decimal value.
*1. You can specify the value depending on
StopTime Gives the setting of the stop time. It is speci-
fied as a decimal value.
*1. You can specify the value depending on
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Description
the model number. For details, refer to
Channel on page 6-25 under 6-4-3 RF
Communications Conditions: Advanced
Settings on page 6-25.
the model number. For details, refer to
Transmission Time on page 6-27 under
6-4-3 RF Communications Conditions:
Advanced Settings on page 6-25.
the model number. For details, refer to
Transmission Time on page 6-27 under
6-4-3 RF Communications Conditions:
Advanced Settings on page 6-25.
Default
true
false
27
27
0
0
00000000
*1. You can
specify the
value
depending
on the
model
number.
For details,
refer to
Transmis-
sion Time
on page
6-27 under
6-4-3 RF
Communi-
cations
Condi-
tions:
Advanced
Settings
on page
6-25.