Application Flowchart - Omron V780 Series User Manual

1-2

Application Flowchart

A simple application flowchart is provided below. For correct application methods and details, refer to
the reference page or section given for each step.
Also, use the Startup Guide provided with the Reader/Writer to help you start operation.
Installing the System
4-1 Installation on page 4-2
Connections and Wiring
4-2 Connections and Wiring on page 4-6
Setting Reader/Writer Communications Conditions
5-2 Setting IP Addresses on page 5-3
Testing the Reader/Writer
6-9-1 RF Tag Access on page 6-45
6-9-2 RF Tag Scanning on page 6-46
Checking the Ambient Environment
6-8-1 Transmission Power Tuning on page 6-42
6-9-3 Reception Level Monitor on page 6-47
6-9-4 Channel Monitor on page 6-53
Testing RF Tag Communications
6-7-3 Communications Diagnostics on page 6-37
6-9-5 Focus Monitor on page 6-54
7-5 Commands on page 7-19
The Reader/Writer can perform various types of communications with RF Tags.
Communications com-
mand name
DATA READ
DATA WRITE
ID READ
ID WRITE
LOCK
DATA FILL
MULTIACCESS ID READ
MULTIACCESS DATA READ
EXTENDED DATA READ
EXTENDED DATA WRITE
EXTENDED MULTIACCESS
ID READ
EXTENDED MULTIACCESS
DATA READ
UHF RFID System V780-series Reader/Writer User's Manual (Z389)
Description
Reads data from the RF Tag in the communications range.
Writes data to the RF Tag in the communications range.
Reads the UII (EPC code) of the RF Tag in the communications range.
Writes the UII (EPC code) of the RF Tag in the communications range.
Locks the memory of the RF Tag in the communications range.
Writes the specified data to the specified number of words beginning from the
specified write start address. The specifications are made in the command.
Reads the UIIs (EPC codes) of multiple RF Tags in the communications range.
Reads data from the memory of multiple RF Tags in the communications range.
Reads data from the RF Tag in the communications range. You can read up to
2,048 words with one command execution.
Writes data to the RF Tag in the communications range. You can write up to
2,048 words with one command execution.
Reads the UIIs (EPC codes) of multiple RF Tags in the communications range.
Gets the UIIs (EPC codes) of more than one RF Tag with one command execution.
Reads data from multiple RF Tags in the communications range. Gets data
from more than one RF Tag with one command execution.
1 Product Overview
Page
P. 7-26
P. 7-28
P. 7-22
P. 7-24
P. 7-30
P. 7-32
P. 7-34
P. 7-36
P. 7-44
P. 7-46
P. 7-48
P. 7-50
1 - 5
1