Starting The Reader/Writer; Procedure To Start The Reader/Writer - Omron V780 Series User Manual

5 Preparations for Communications
5-1

Starting the Reader/Writer

5-1-1

Procedure to Start the Reader/Writer

1
Connect the Cable to the Reader/Writer.
Additional Information
Refer to 4-2-1 Connecting and Removing the Reader/Writer Power Cable and Ethernet Cable
on page 4-6 for the methods to attach and connect the Reader/Writer Power Supply Cable and
Ethernet Cable.
2
Connect the power supply lines and the operation mode signal line in the Cable to the power
source and connect the RJ45 connector to an Ethernet port on the host device.
3
Turn ON the power supply to start the Reader Writer.
If the Reader Writer starts normally, the RUN indicator will light green.
5 - 2
UHF RFID System V780-series Reader/Writer User's Manual (Z389)