Avaya DEFINITY ONE Installation And Upgrades page 7

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
Checklists
Checklists for Installation Technicians
Installation Tasks
‰ Install equipment room hardware for Avaya
IP600 or DEFINITY ONE.
Cross-connect the cabinet to the patch
~
panels for IP600 or the MDF for Definity
One.
Identify the allowable circuit packs.
~
Install the circuit packs.
~
Make sure that off premises circuits have
~
protection from hazardous voltages and
currents.
~ Install sneak fuse panels.
~ For Definity One, label the MDF.
‰ Set ringing option.
‰ Install and wire telephones and other
equipment.
Install attendant console. (optional)
~
Install 26B1 Console. (optional)
~
‰ Connect external alarms and auxiliary
connections.
‰ Install the BRI terminating resistor.
‰ Use multi-point adapters to provide signal
fanout of the T-interface.
‰ Wire the off-premises stations with the cabling
provided by the local telephone company.
‰ Install the emergency transfer panel (or
equivalent) and associated analog telephones
to provide emergency transfer capabilities.
‰ Connect modem.
December 2001
For More Information
See:
DEFINITY Communications
System Generic 1 and Generic
3 Main Distribution Field
Design (555-230-630),
''Install equipment room
hardware for Avaya IP600'' on
page 1-37
or
''Install equipment room
hardware for DEFINITY
ONE'' on page 1-80.
See ''Set ringing option for
Avaya IP600'' on page 1-49
or
''Set ringing option for
DEFINITY ONE'' on page
1-95.
See ''Install and wire
telephones and other
equipment'' on page 1-97.
See ''Connect external alarms
and auxiliary connections'' on
page 1-110.
See ''Install the BRI
terminating resistor'' on page
1-113.
See ''Install multi-point
adapters'' on page 1-117.
See ''Install off-premises
station wiring'' on page
See ''Install emergency
transfer panel and associated
telephones'' on page 1-125.
See ''Connect modem to
telephone network'' on page
1-133 and ''Connect modem''
on page 1-134.
Issue 6
vii
1-120.