Cwy1 Announcements - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
6 Hardware Additions
Multiple integrated recorded announcements
Move a single announcement to another
announcement circuit pack
Follow this procedure to move a single announcement to another announcement
circuit pack:
1. Enter the change announcements command to change the circuit pack
locations of a particular announcement. (You may also change the
compression rate at this time.)
2. Re-record the announcement, as described in DEFINITY Enterprise
Communications Server Release 10 Administrator's Guide (555-233-506).

CWY1 announcements

With CWY1 announcements, customers can produce and use professional quality
announcements and store them on the DEFINITY ONE or IP600 hard drive. Voice
processing of the announcements is handled on the CWY1 board. The CWY1
board is resident as a component of the TN2314 processor board. Handling
announcements on the CWY1 board eliminates the need for the TN750 board,
thus freeing the slot occupied by the TN750 board. CWY1 announcements can be
stored on the DEFINITY ONE or IP600 hard drive and backed up and restored to
a LAN drive.
To install CWY1 announcements, you use the DEFINITY ONE or IP600 user
interface to upload the announcements file from a server directory to the
announcements directory. The file is moved to the appropriate announcements
directory and converted from WAV format to speech format.
Installing CWY1 announcements
To install CWY1 announcements:
1. From the DEFINITY ONE or IP600 home page, click Administer System.
The System Administration page displays.
2. Click Announcement Admin. The Announcements Administration
page displays.
Issue 6
December 2001
6-25