Avaya DEFINITY ONE Installation And Upgrades page 393

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
9 Troubleshooting
Modem configuration and administration
External modem not used
NOTE:
This procedure is necessary if the factory shipped modem is not used.
1. Connect to pcAnywhere.
2. Click Start > Settings > Control Panel.
3. Double-click Modems.
The Install New Modem screen displays:
4. Click Don't detect my modem. I will select it from a list.
5. Click Next.
6. Click Add.
7. Select the manufacturer (3COM Corp) and the model (US Robotics 336K
FAX Ext).
8. Click Next.
9. Select the port the modem is attached to (COM1).
10. Click Next.
The Modem Setup screen states that you need to restart the modem
before using it.
11. Click Finish > OK.
Another Install New Modem screen states that the modem is set up
successfully. The Modem Properties screen displays.
Issue 6
December 2001
9-7