Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
9
Troubleshooting
Modem configuration and administration
External modem installed
1. Enter display system-parameters maintenance and press
2. Verify that the Alarm Origination Activated to OSS Numbers field is set to y
and press
3. Verify that the Cleared Alarm Notification and Restart Notification fields are
set to y.
4. Test remote access port to n.
Verify external modem option settings
1. Connect to pcAnywhere.
2. Click Start > Settings > Control Panel.
3. Double-click Modems.
A Modem Properties screen displays that shows the US Robotics 336K
FAX Ext modem.
4. Click Next.
Another Modem Properties screen displays.
5. Verify that the modem port is attached to COM1.
6. Click Next.
Another Modem Properties screen displays.
7. Right-click Properties.
8. The Properties screen displays.
Verify that speed and speaker volume defaults are set.
9. Click Connection.
10. Verify that Data bits is 8, Parity is none, and Stop bits is 1.
11. Click Advanced.
The Advanced Connection Settings screen displays.
12. Verify that the defaults are set.
13. Click OK > Close.
14. Configure External Option Modem
.
ENTER
Issue 6
December 2001
9-6
.
ENTER