Avaya DEFINITY ONE Installation And Upgrades page 309

Internet protocol communications server
Hide thumbs Also See for DEFINITY ONE:
Table of Contents

Advertisement

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
5
Upgrade and Repair Procedures
Replacing a TN795 board with a TN2314 for R10
41. Enter the customer's numbers for IP address, Subnet mask, Default
gateway, and Preferred DNS server.
Reminder: Your recorded this information during an earlier step.
42. If the customer's settings on the TN795 included a DNS suffix or domain,
or WINS server information, click Advanced, otherwise skip to step #46.
43. Click the DNS tab and enter the information you wrote down earlier from
the TN795.
44. Click the WINS tab, click Add.
The TCP/IP WINS Server window displays.
45. Enter the WINS server number you wrote down earlier from the TN795,
click Add > OK.
46. Click OK three times, reboot not necessary.
47. Load and install license and password files.
License files are generated in RFA and can be either:
For instructions on downloading and installing license files, go to
License File'' on page
download license files. If you are not, you must attend training and become
approved.
If you are in the U.S. use Avaya's Automatic Registration Tool (ART) to
obtain a password file. International users should go the IWP. For
information on password files, go to page
3-6.
If the license file has not been loaded on the system and the license and
password files are on your laptop, use the File Transfer Protocol (FTP)
software to move them to the Definity One or IP600. Then use the following
bash commands from the ftproot directory to load them: loadlicense
licensefile.bin, loadpwd password.bin. For more information see
''Transfer and install the password file and installation scripts'' on page
3-10.
Do not restart until after restoring translations.
48. Right-click My Computer, and select Properties, the Network
Identification tab, Properties.
The Identification Changes window displays.
49. Enter the "Computer name" you want to call your computer.
Select a "Member of" radio button for Domain or Workgroup and enter the
name you want to use.
a. Downloaded to your laptop
b. Sent to your email address
c. Downloaded and installed directly to the Definity One or IP600 using
the RFA Direct Connection method (available mid-2002).
3-15. You must be an approved RFA user to
December 2001
''Obtain a password file'' on page
Issue 6
5-7
''Obtain a

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip600

Table of Contents