Avaya DEFINITY ONE Installation And Upgrades page 186

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2 Connectivity and Access to DEFINITY ONE or IP600
Creating physical connections
20. Click the Gateway tab. If a gateway is shown, record the gateway number.
Highlight the gateway and select Remove.
21. Click OK here and in the following windows.
22. Click Yes to restart your computer.
23. When the laptop reboots, verify that it is now connected to the DEFINITY
ONE or IP600 system. See
IP600 to laptop'' on page
Verify connection from DEFINITY ONE or IP600 to
laptop
1. Start a DOS shell on the laptop by clicking Start > Programs > MS-DOS.
2. In the DOS window type ping 192.11.13.6 and press Enter.
A series of 4 similar replies indicating successful response should display:
3. If a timeout reply displays, check cabling or review the previous setup
steps. Also verify that DEFINITY ONE or IP600 is operating normally and
referencing the LEDs on the front panel of the TN2314 circuit pack. See
Table E-1 on page E-4
Restore the laptop settings
This procedure restores the settings on the technician's laptop computer to their
state prior to connecting to the DEFINITY ONE or IP600 system.
1. Right-click Network Neighborhood. Select Properties.
The Network dialog box displays.
2. Click the Configuration tab.
3. Click the File and Print Sharing button and select the I want to be able to
give others access to my files box.
4. Choose Client for Microsoft Networks from the Primary Network Logon
list.
5. Click the Identification tab and enter the computer name and workgroup.
6. Click the Access Control tab and check the appropriate boxes so that this
dialog box matches its earlier settings.
7. Click the Configuration tab.
Reply from 192.11.13.6 bytes=32 time=1ms TTL=128
Reply from 192.11.13.6 bytes=32 time=1ms TTL=128
Reply from 192.11.13.6 bytes=32 time=1ms TTL=128
Reply from 192.11.13.6 bytes=32 time=1ms TTL=128
If a dialog box appears notifying you that the security provider could
not be found, click Yes.
If the Authenticator type dialog box appears, select Windows
2000 Domain, and click OK.
''Verify connection from DEFINITY ONE or
2-10.
Issue 6
December 2001
2-10