Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
6
Hardware Additions
Map Network Printer
4. Select IP Address Tab.
5. Write down the IP Address and Subnet Mask, these will be needed later.
6. Change IP Address to 192.11.13.5 and Subnet Mask to 255.255.255.252.
7. Click OK.
8. Click OK in Network Window.
9. Click OK when system says this need to be done for settings to take affect.
10. Go to START, Settings and select Control Panel.
11. Double click on display.
12. Go to the Screen Saver tab and set screen saver to NONE until upgrade is
done.
!
WARNING:
If the laptop screen saver is not disabled and times out during the session,
the Terminal Server™ session will drop. The technician will have to wait
approximately 5 minutes to re-establish the connection.
Issue 6
December 2001
6-30