Avaya DEFINITY ONE Installation And Upgrades page 299

Internet protocol communications server
Hide thumbs Also See for DEFINITY ONE:
Table of Contents

Advertisement

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
4
Intuity AUDIX Digital Networking
Changing local machine information
Table 4-6. Field definitions; remote machine profile screen, page 2
Field
Send to Non-
Administered
Recipients?
Updates:
In?
Updates:
Out?
Network
Turnaround
6. Press
The cursor returns to the command line, and the system displays the
following message:
Command Successfully Completed.
7. Press
8. Enter exit or another administrative command at the enter command:
prompt.
Valid Input
Description
y= yes
Enter y if the system will attempt to deliver
n = no
messages to non-administered remote recipients.
Enter n if messages cannot be sent to
nonadministered recipients.
y= yes
Enter y if the local system will accept updated
n = no
database information from the remote system (the
Updates Out field must also be set to y on the local
Machine Profile screen).
Set to y only after testing the network end-to-end
during initial administration.
y= yes
Enter y if the local system will send updated
n = no
database information to the remote system (the
Updates In field must also be set to y on the local
Machine Profile screen).
Set to y only after testing the network end-to-end
during initial administration.
y= yes
If you are conducting an acceptance test, enter n.
n = no
After the acceptance tests, enter y if a network
connection that originated from this remote system
is allowed to turn around after the remote system
has sent all of its network data to the local system.
The local system may then return update
information, voice mail, and status on the same
connection. This feature reduces toll charges and
increases the efficiency of the system in networks
with more than 10 machines.
The Network Turnaround field must be set to y on
the local Machine Profile screen for this feature to
work between the local system and the remote
system.
to save the information.
F3 [Enter]
to return to the command line.
F3 [Cancel]
Issue 6
December 2001
4-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip600

Table of Contents