Avaya DEFINITY ONE Installation And Upgrades page 213

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2 Connectivity and Access to DEFINITY ONE or IP600
Access methods
Dialin permissions to an existing login
The system administrator can give dialin permissions to an existing login by the
following procedure:
1. Go to Start> Programs> Administrative Tools (Common).
2. Click User Manager.
3. Double-click on an existing login that will be dialing in.
4. At the bottom of the User Properties window, click on the Dialin icon.
5. Select the Grant dialin permission to user and No Call Back options, and
click OK.
6. Click OK, and again in the User Properties window.
7. Exit User Manager.
Creating a login for remote access
The system administrator can create a login for remote access as follows:
1. Go to Start> Programs> Administrative Tools (Common).
2. Click User Manager.
3. On the top toolbar, click on User, and select New User .
4. In the dialog box, assign the Username (this is the login) and the
Password .
5. Click on Groups at the bottom of the dialog box.
6. Make the login a member of officeadmin and Users groups , and click OK.
7. Click on Dialin at the bottom of the dialog box.
8. Check the Grant dialin permissions and No Call Back boxes, and click OK.
9. Click OK in the New User dialog box.
10. Close User Manager.
NOTE:
Full Name and Description are optional. The Options check boxes
are the customer's choice, but it is recommended that User Cannot
Change Password and Password Never Expires should be the only
ones checked.
Issue 6
December 2001
2-37