D Recovery; Definity One Or Ip600 System Level Shutdown And Restart - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
D Recovery

DEFINITY ONE or IP600 system level shutdown and restart

Recovery
This chapter provides information about system recovery for DEFINITY ONE or
IP600. This chapter is organized as follows:
''DEFINITY ONE or IP600 system level shutdown and restart'' on page D-1
''DEFINITY software reset (recovery)'' on page D-4
''Reset System 1 (DEFINITY warm start)'' on page D-4
''Reset System 2 (DEFINITY cold start)'' on page D-4
''Reset System 3 (DEFINITY reboot)'' on page D-5
''Reset System 4 (DEFINITY reboot)'' on page D-5
''Reset System 5 (System reboot)'' on page D-5
When the system is initially powered up, or when an existing system experiences
a catastrophic fault that interrupts its basic functions, the system reboots.
DEFINITY ONE or IP600 system level
shutdown and restart
Table D-1 on page D-2
can be initiated by the system technician, the customer, and by hardware. The
state of the shutdown and restart actions is indicated by the state of the LEDs on
the TN2314 processor circuit pack (See
of the user commands can be found in DEFINITY ONE Communications System
Release 10, DEFINITY ONE Maintenance (555-233-XXX) or IP600 Maintenance
(555-233-XXX).
presents system level shutdown and restart actions that
Appendix
December 2001
E). More details about the use
Issue 6
D-1