Avaya DEFINITY ONE Installation And Upgrades page 467

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
G GAS Commands in the bash shell
Avaya (Lucent) access controller bash commands
GAS Commands in the bash shell
This chapter provides information about bash commands that are used in the
installation process. It also includes information on the setip command. These
commands are not available to the customer.
Avaya (Lucent) access controller bash
commands
The following commands are useful during installation and maintenance tasks and
are allowed for the avaya logins. After opening the LAC bash shell, enter the
name of the command. Refer to DEFINITY ONE Maintenance (555-233-130) or
IP600 Maintenance (555-600-100) for more detailed information.
Table G-1. bash commands for avaya logins
Command
alarmorig
alarmstat
autobackup
backupparams
backupsource
cleargamalarm
d1backup
d1disable SNMP
d1enable
Description
Turns on alarm origination from the GAM (INADS)
Gives global alarm status (major, minor, or none) for
the GAM, DEFINITY, and Intuity AUDIX
Enables and disables backup commands
Enables day and time destination
Selects the data to be backedup
Clears all GAM alarms after failure conditions are
repaired
No help
Disables SNMP
Enables SNMP
Issue 6
December 2001
G-1
Continued on next page