Other Commands - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
G GAS Commands in the bash shell

Other commands

Setting WINS addresses
If the customer is using WINS you can set WINS information with the setip
wins=[ip-addr-primary[,ip-addr-backup]]. This will set the IP address of the
primary and secondary IP addresses for the windows NetBios on the TCP name
server.
Ex: setip wins=155.9.145.1,155.9.145.4
After setting the customer's WINS IP address, the setip command displays the
new and the old settings.
Once you have set all the appropriate settings for your location, enter reboot nice
to restart the system with the new settings.
Other commands
ftpserv command
The ftpserv command is executed from a console bash shell and turns on the
FTP server. If you attempt to ftp into the DEFINITY ONE or IP600 and receive a
connection refused message, then ftp is not running.
To turn on ftp enter: ftpserv
To turn off ftp enter: ftpserv -c
d1stat command
The d1stat command is used from a LAC bash shell to determine the current sta-
tus of each application.
Example: estonia-avaya1>d1stat
NT
NTras
NTweb
pcAnywhere
NTconsole
NTplatform
CoResServ
DEFINITY
SNMP
11/11 UP
2/2 UP
1/1 UP
0/1 DOWN
2/2 UP
6/6 UP
5/5 UP
51/51 UP
3/3 UP
Issue 6
December 2001
G-7