B Set Up And Use Of Customer Logins; Windows Logins For The Customer; Windows Login Types For The Customer - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
B Set Up and Use of Customer Logins

Windows logins for the customer

!
WARNING:
The logins in the Lucent group of
use of Avaya Services personnel. These logins are established and updated
automatically by Lucent software. DO NOT ALTER THESE LOGINS IN ANY
MANNER. To do so may render the system unserviceable and may require a
partial or complete reinstallation of the software by Avaya personnel.

Windows login types for the customer

Administrator login
NTadmin
This is a standard Windows administrator account used to administer
network parameters and similar functions.
Intuity AUDIX logins
browse
This login is used in the Voice Messaging application. See the I
AUDIX documentation or
accessible to the browse login. This login is disabled from the factory. It
must be enabled and a password chosen before it can be used. See
''Setup login accounts'' on page
vm
This login is used in the Voice Messaging application. See the I
AUDIX documentation or
accessible to the vm login. This login is disabled from the factory. It must be
enabled and a password chosen before it can be used. See
accounts'' on page
sa
This login is used in the Voice Messaging application. It has full customer
administration privileges. See the I
B-2 on page B-4
is disabled from the factory. It must be enabled and a password chosen
before it can be used. See
Table B-2 on page B-4
Table B-2 on page B-4
B-7.
for a list of commands accessible to this login. This login
NOTE:
The stand-alone I
NTUITY
menu. This feature is not supported on DEFINITY ONE or IP600. All
logins result in a Forms Screen interface.
Table B-1 on page B-2
B-7.
AUDIX documentation or
NTUITY
''Setup login accounts'' on page
AUDIX system login sa normally produces a
Issue 6
December 2001
are for the exclusive
NTUITY
for a list of commands
NTUITY
for a list of commands
''Setup login
Table
B-7.
B-3