Avaya DEFINITY ONE Installation And Upgrades page 435

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
C Miscellaneous Procedures
Installing INTUITY languages other than English
For Windows
1. Right click on My Network Places, and select Properties.
This opens the Network and Dial-up Connection window.
2. Right click on the Local Area Connection, and select Properties.
3. In the Connect Using window, select the General tab.
4. Left click on Internet Protocol (TCP/IP) in the lower portion of the window.
5. Left click on Properties, which is now selectable.
6. If there is an IP address in the next window, write it and any other
information down. these will be needed later.
7. Change the IP Address to 192.11.13.5 and the Subnet Mask to
255.255.255.252.
8. Click OK.
9. Close the windows and reboot the system, if needed.
10. Connect the cable between the laptop and the TN2314 NIC card.
!
TM
2000, there have been some changes:
NOTE:
If Use the following IP address does not have a dot in it, left click it.
NOTE:
If there is anything in the DNS, the system needs to be rebooted for
the changes to take effect.
CAUTION:
When using Terminal Server
display, use the scroll bar on the right side of the display to go to the
bottom of the desktop screen. That is where the Start button for the
desktop is found. Otherwise, the Start button on the Taskbar may be
that of the laptop. The technician can also right click on the laptop
Taskbar, select Properties, and check the Auto Hide box. This will
cause the Taskbar to be hidden until the cursor is moved to the very
bottom of the display.
TM
, because of the size of the laptop
Issue 6
December 2001
C-7