Circuit Pack Installation - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1 Install and Cable the Cabinet
Install equipment room hardware for Avaya IP600

Circuit pack installation

!
WARNING:
When handling circuit packs or any components of an Avaya IP600 system,
always wear an authorized wrist ground strap. Connect the strap to the
ground connector provided on the system cabinet.
Circuit pack slot loading
1. Check the reinstalled circuit packs. All of the circuit pack slots in the RMC
are "universal slots." Any slot can contain any type of port circuit pack with
the following exceptions for cabinet A. See
2. Load all port circuit packs. See
recommended circuit pack layout.
Figure 1-18. RMC cabinet and slot numbering
The TN2314 Processor circuit pack must be installed in slot 2 of
cabinet A.
TN744E Call Classifier/Tone Detector circuit pack should be
installed in slot 3.
1 2 3 4 5
BBI 100bT
In Use LINK LINK
Maj Alarm
TRMT TRMT
Min Alarm
RCV RCV
Clock
Emergency
Transfer
On
Auto
Off
Complete
Shutdown
1 2 3 4 5
Power
Figure
Table 1-6 on page 1-43
6 7 8 9 10
6 7 8 9 10
Issue 6
December 2001
1-18.
for the
scdpslot KLC 102600
1-42