Avaya DEFINITY ONE Installation And Upgrades page 242

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3 System Initialization
Administer DEFINITY ONE or IP600
7. Login
8. Scroll the screen down to the desktop taskbar, and perform the procedure
described in the introduction to this section to set the date and time.
Remote Dial-In
If the customer needs to dial-in remotely, they will have had to set up a Windows
95 or Windows 2000 user with dial-in permissions. If this has been done, perform
the following steps:
1. Go to My Computer.
2. Double-click on Dial-Up Networking.
3. Double-click on Make New Connection.
4. Type in the name field (the system should fill in the correct modem
attached to the PC; if not, choose the modem the system has).
5. Click Next.
6. Type in the Area code and Telephone number for the system.
7. Click Next.
8. Click Finish in the window saying the connection was created.
9. In the Dial-Up Networking window, right-click on your connection icon.
10. Left click on Properties.
11. Select the Server Types tab.
12. In the Type of Dial-Up Server drop-down window, select PPP Windows 95,
NT 3.5 Internet.
13. Under Allowed network protocols , only TCP/IP should be checked.
14. Click OK when finished.
15. Access the system by double-left-clicking the connection icon.
16. On the connect screen, type in User name and Password .
17. Click Connect.
18. When the connection occurs, a screen opens. Click on the Continue box.
19. A login window may appear, saying that the connection was successful.
Click OK.
The dial-up connection drops down to the tray on the taskbar next to the
Time.
20. Once the dial-up connection is established, return to step 1 of the previous
section.
Issue 6
December 2001
3-24