Avaya DEFINITY ONE Installation And Upgrades page 465

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
F Status LEDs
Other circuit packs
Green (test) — the system is running tests on this circuit pack.
Yellow (busy) — indicates that the circuit pack is in use.
During the various states of operation (start-up testing, normal operation,
circuit failure, and so forth) circuit pack status LED indications appear as
shown in
Table F-1. Control and port circuit pack status LEDs
Equipment
type
Port circuit
packs
4. If the system seems to be functioning correctly, but the circuit pack
does not start communicating with the system, replace the circuit
pack.
NOTE:
A port circuit pack also lights its red LED when it performs
initialization tests (for example, when the circuit pack is initially
inserted into the system). If all initialization tests pass, the red LED is
turned off. If any initialization tests fail, the red LED remains lighted
and the circuit pack is not placed into service.
Table F-1.
LED Description
Red On briefly during power up, circuit pack
reseating, resetting, and system reset.
Steadily on if circuit pack fails start-up test or
fails while in use. Off during normal operation.
Green Briefly on during circuit pack testing following
power up, circuit pack reseating, and system
reset. On during periodic, scheduled, and
system technician demanded testing. Off
during normal operation.
Yellow On when any port in the circuit pack is in use,
otherwise, off.
Issue 6
December 2001
F-3