Controlling Avaya Cu360 With At Commands - Avaya CU360 Installing And Administering

Advance administration

Controlling Avaya CU360 with AT commands

About this task
You can use AT commands to control the functions of Avaya CU360 on the endpoint and web
interface.
Avaya CU360 can receive AT commands from:
• The device network connection to the controller's IP address through the 55003 port.
• The device USB connection to the controller's serial port through a standard RS232 cable.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Utilities > Remote Access > AT Commands.
4. Click one of the following in the AT Commands Management field.
• No: Disables the remote access to Avaya CU360 using AT commands through the TCP,
SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya CU360 using AT commands to only the
TCP connection.
5. Configure the following fields:
IP
Enable All Addresses
Address
Subnet Mask
6. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
July 2020
SSH
Enabled
User Name
Password
on page 40
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
RS232 Serial Port
Always Initialized
Baud Rate
—
122